Hello! Welcome to the official website of Coolsolte Electronic Technology Co., Ltd.
Hot search:

All-in-one radiator|Server radiator|Projector radiator

Product classification

Industry information


Why is the radiator of hot?

With the increasing demand for large screen output and the falling price of projectors, people have more and more frequent contact with projector radiators in life. Whether it is for work or for home use, for most users, the projector is still a novice, doing is simply projecting the picture onto the screen or wall, and how to maintain and extend the life of the projector is little known. Among them, the projector is also in great need of maintenance and reasonable use, especially in the heat dissipation, is the most important. If you put your hand on the radiator fan on the back of the projector after a long period of work, it will be obvious that a hot heat is being emitted. Do you know where the heat comes from? If you don't exclude the heat in time, will you hurt the projector? So how should we take measures to effectively dissipate the projector?
Where does the projector's heat come from?
When you read the product parameters of the projector, you must have noticed that there is a parameter about the power of the light bulb. In fact, the projector can project light by this backlight bulb. The projector needs a high intensity of brightness to project the image clearly onto the screen, so its power Usually more than 100W, the bulb will emit enormous heat if it works in such a narrow space for a long time. At the same time, the built-in projector stabilized power supply, will also emit a lot of heat, if these heat is not released in time, it will make the projector internal high temperature, high temperature, the projector will be low efficiency, and long working time, the projector life will be greatly improved. In fact, most electrical appliances do not have the ability to withstand high temperatures for a long time.
Harm of heat to projector
A large amount of heat emitted from the projector imaging system will cause the temperature inside the projector to rise rapidly, while the quartz inside the projector bulb will become impermeable at high temperature, resulting in white spots. Due to the large amount of obstruction of light at the impermeable area, the temperature of the local area will rise abnormally, which will further cause the impermeable area. Enlargement, which makes the luminance decay rapidly, and is likely to cause the bulb to explode. In addition, the physical properties of the chip board inside the projector determine that its working temperature is not allowed to be too high. Once the temperature of other optical components exceeds its endurance range, it will cause damage to optical components. The heat emitted from the radiator power supply part of the projector will cause the temperature of the power supply part to be too high, which will lead to the drying of the electrolytic capacitor of the projector power supply, resulting in the burning of the projector power switch tube.
Heat dissipation design of projector
At present, many projectors on the market are heat dissipated by installing fans in the projector to heat the optical imaging system and the power supply of the projector, so that the projector works under the fan, and the interior of the projector will be in a kind of heat. Equilibrium state.
In addition, after long-term use of the projector, also can not immediately cut off the power supply, because at this time the internal temperature is very high, once let the cooling system stop working immediately, the accumulated heat can not be emitted, will also cause damage to the projector. The right thing to do is to turn off the bulb and let the cooling system continue to work for a few minutes until the temperature drops and then turn off the power completely. Some projectors now have delayed shutdown, which automatically shuts down the entire host after the heat dissipation is complete, so the user does not have to wait by the projector for heat dissipation.
The heat dissipation of the projector is a difficult problem to solve for a while. Major manufacturers are also actively studying ways to improve, such as improving the fan structure, increasing air supply, reducing the heat of the bulb, and so on. I believe that one day, we do not have to worry about the heat problem of the projector.